Signal Conditioners
Signal conditioners have a flat frequency response to over 750 MHz and have been tested to 100,000 pulses of 1.5 kV with a 400 ns pulse.

---

Power Tee
Power Tees are 50Ω, two channel passive R.F. devices specifically for pulsed power applications.

We can build Power Tees for your custom application.

---

Attenuators and Shorting Caps
Attenuators are used in many functions. They are especially ideal for high power, short pulse signals (pulsed power) applications. TEAM’s shorting caps and terminators are non-inductive and can handle up to 10 watts depending on the required resistance and connector type. These items typically have SMA, BNC, N or HN male and female connections.



We can custom make attenuators and shorting caps with nearly any resistance and connector type you specify.

---

Integrators

50Ω Load Integrators

• Time constants: 0.35, 1.0, 1.9, 4.0, 8.5, 35, 50 and 68 μsec (nominal)
• Input / Output impedance: 50Ω (bi-directional)
• Bandwidth: approximately 450 MHz or better
• Peak energy: 500 V for 100 nsec (BNC or N connector) @ 1 μsec τ or longer
• Peak energy: 400 V for 100 nsec (SMA connector) @ 1 μsec τ or longer
• 2 x attenuation

1 MΩ Load Integrators

• Input impedance: 50Ω, Output impedance 1MΩ (unidirectional)
• Note: input should be terminated with 50Ω
• Bandwidth: approximately 350 MHz or better
• Peak energy: 800 V for 50 nsec (BNC or N connector) @ 1 μsec τ or longer
• Peak energy: 400 V for 100 nsec (SMA connector) @ 1 μsec τ or longer

50Ω Low Loss Integrators

• Time constants: 0.177, 0.500 and 0.800 μsec (unidirectional)
• Bandwidth: approximately 500 MHz
• Peak energy: 500 V for 100 nsec (BNC or N connector) @ 1 μsec τ or longer
• Peak energy: 400 V for 100 nsec (SMA connector) @ 1 μsec τ or longer

Time constants available for integrators are:
50Ω bi-directional devices: 0.035, 1.0, 1.9, 4, 8.5, 35, 50 & 70 μsec
1MΩ unidirectional devices: 1.77 ~ 390 μsec

---

High Voltage Bias Insertion Unit

Optimized For High Frequency — Allows application of high voltage, low current bias on various instruments such as our High Voltage Bias Insertion Unit. Bias network composed of a current limiter resistor and blocking capacitors. Follows a 1 nanosecond (nsec) pulse within 20 picoseconds (psec).

---

Balun Common Mode Noise Rejection System

Two Channel Adders

• N Connectors for adding identical signals
  having opposite polarity
• Especially useful for elimination noise from you data
  when millivolts of noise is as large as your signal
• The Balun unit has a bandwidth of 15 kHz to
  400 MHz at 3 db
• EMP tight

---